Watch it live
Book a 20-minute video call and we walk you round the floor while your order is on it.
Ask for a call →How we
make it.
Every MAURM glove goes through eight stages under one roof. Scroll down and watch one pair go from your brief to a labelled box on its way to your gym.
- 8Stages
- 1Workshop, no subcontractors
- 40+Pairs of hands per glove
- 100%Pieces weighed and checked
Brief to boxOne glove,
One glove,
eight stages.
Typical days for a first order of 300 pairs. Repeat orders skip the proof and sample and run about two weeks shorter.
Stage 01 / 08Day 0
Your brief arrives: logo, colours, weights and sizes
- 01Day 0
Brief
It starts with your logo, colours, the weights your members use and the date you need them. A studio link, a sketch or a glove you like is enough; you don't need finished artwork.
- Logo, any format
- Colours or Pantone
- Weights and sizes
- Delivery date
- 02Days 1–2
Pattern + proof
We draw your glove on the real pattern for each weight, place every logo and graphic, and send a 3D proof of every view within 24 hours. Nothing is cut until you approve it.
- 3D proof
- Every weight
- Changes until it's right
- 03Days 13–16
Cut
After the sample is approved, the leather or PU is checked for flaws and each panel is clicked out with a steel die: the back of the hand, palm, thumb, cuff and strap, in every weight on your order.
- Steel dies per weight
- Grain checked
- Bundled by size
- 04Days 16–19
Print + emboss
Your logo and graphic go on while the panels are still flat, so they line up perfectly: screen print or HD print on the back and strap, embossing or hot foil on leather, a woven label on the cuff.
- Screen or HD print
- Emboss or foil
- Registered to the seams
- 05Days 19–31
Stitch
Machinists join the panels inside out with double-stitched seams, bind the cuff and attach the thumb to the body so it can't snap back on impact. Then the glove is turned right side out.
- Double-stitched seams
- Attached thumb
- Bound cuff
- 06Days 31–40
Padding + shape
The padding is built by weight: a dense core over the knuckles, a mid layer and a soft face, or one injected-foam block. The glove is shaped on a hand last so the fist closes naturally.
- 3-layer or injected foam
- Set by weight
- Shaped on a last
- 07Days 40–44
Quality check
Every pair is weighed, then checked against your approved proof: colours, logo placement, stitching, thumb, strap and lining. An AQL 2.5 inspection follows, and you get the photo report. See what we check.
- Every pair weighed
- AQL 2.5
- Photo report
- 08Days 44–56
Pack + ship
Gloves are paired, tagged and packed in your choice of poly bag or printed box, labelled by weight, cartoned and shipped FOB, CIF or DDP. Air takes 5–7 days; sea 25–35.
- Paired + tagged
- Your boxes
- FOB · CIF · DDP
TimelineAbout eight weeks,
About eight weeks,
start to finish.
Typical days for a first order with a sample. Repeat orders skip the proof and sample, and printed boxes or a new mould add a week or two.
StageDays
BriefYou
Day 0
Pattern + proof
1–2
SampleRecommended
+7–10
Approve + depositYou
12
Cut
13–16
Print + emboss
16–19
Stitch
19–31
Padding + shape
31–40
Quality check
40–44
Pack + shipAir 5–7 · sea 25–35
44–56
Total
≈8 weeks
Inside the gloveFive layers
Five layers
you never see.
What sits between your logo and your members' hands, from the outside in. Each layer is a choice you make in the studio.
01 · Shell
PU, microfibre or leather
Cut from graded hides or rolls; matte, gloss or metallic.
02 · Face foam
Soft latex layer
Takes the sting out for the person you're hitting.
03 · Mid foam
Shock layer
Spreads the impact across the knuckles.
04 · Core
Dense knuckle core
Or one injected-foam block, set by the glove's weight.
05 · Lining
Wicking, antimicrobial
With a Tali Jali mesh palm if you want it vented.
QualityWhat we check,
What we check,
and when.
| Stage | What we check | How |
|---|---|---|
| Stage 02Proof | Every logo, colour and weight against your brief and Pantone codes | You sign off the 3D proof before anything is cut |
| Stage 03Leather in | Thickness, grain and shade of each hide or roll | Measured and inspected before cutting |
| Stage 04After printing | Logo colour and placement against the proof | Compared under daylight lamps on the first panel of each run |
| Stage 05After stitching | Seam strength, thumb attachment, loose threads, labels | Every glove |
| Stage 06After padding | Weight per glove against the stated ounces | Every glove on a calibrated scale |
| Stage 07Before packing | Colours, logo, strap, lining and pairing | AQL 2.5 sampling, with a photo report sent to you |
Don't take our word for itSee it
See it
yourself.
Three ways to check our work before your members wear it.
Hold a sample
A pair in your design and weight before the full run, in 7–10 days. The fee comes off your order.
Sample options →Send your inspector
SGS, Bureau Veritas, Intertek or your own QC on site before you pay the balance.
Quality and compliance →QuestionsHow it
How it
works.
Curious about something we didn't cover? Ask the people who make it.
Ask the sales deskIs everything made in your own workshop?
Yes. Cutting, printing, stitching, padding, checking and packing all happen under one roof, so one team is responsible for your order from start to finish.
Why is the thumb attached?
A loose thumb can snag an eye or bend back on impact. Stitching it to the body keeps it tucked in, which is why we do it on every glove we make.
How do you hit the stated weight?
The padding is cut and layered per weight, then every glove is weighed after shaping. A 12 oz glove leaves the floor within a few grams of 340 g.
Can we see a sample before full production?
Yes. We make a pair in your design and weight before the full run. It takes 7–10 days, and the fee is credited against your order.
What happens if something arrives wrong?
Report it within 30 days of arrival with photos. If it doesn't match your approved proof, we credit or remake it on your next order.
Start at
stage one.
Design it in the studio or send your brief, and get your quote plus a 3D proof within 24 hours.